How To Remove Links From A Hamilton Watch

If playback doesnt begin shortly try restarting your device. Pull the pin out of the opposite side with needle-nose pliers.

Hamilton Khaki Field Automatic H70455133 Review Complete Guide Millenary Watches

Pry the edge of the band up to get to the small connecting piece.

How to remove links from a hamilton watch. Repeat this process on the other side of the link. It still seems ridiculous to have to remove the movement to replace a battery on a quartz watch. Lay the watch on its side on your flat surface.

Push a pin into the hole on the side of a marked link. Learn more about changing watch bands. This gives you an idea of whether two four or six links need to come out.

Somebody was sleeping at Hamilton when this watch was designed. Resize your Watch Band and Remove Links with Basic Tools. Remove Links Step 1.

Be sure to leave about 12 centimeter 02 in of space between the bottom of each removable link and the flat surface. With the proper tool a crystal remover I guess it is little different from removing the back. With the clasp done up pinch it at the side and see how many links gather together.

If youd like to see how to install them. Wrap the band around your wrist and hold the disconnected ends together with your other hand. Flick the tip of your fingernail inside the clasp to open the extra links.

Continue doing so until you have removed all of the links that are making the watch too big for your wrist. If the links have oval shaped cutouts in the back with arrows pointing toward them your watch most likely has t-bar pins holding it together. The best way to identify a band with screw links is to look at the side of the band.

Measure Put on your watch and position it to where you want it to sit on your wrist. If the links are solid on one side with a hole on the other side with a screw head facing up. Otherwise proceed with the current step.

Count up the number of links you will need to remove. Remove the the small piece -- its actually a spring. Push the pin in the direction in which the arrow is pointing.

If you determine that more links need to be removed repeat steps 1-3. Place the watch bracelet in the holder so the arrows are pointing downward. If you have short fingernails try using tweezers or anything with a sharp edge that can easily unfasten a link.

Wrap the band around your. Bring the point of the push-pin tool to the pin and lightly tap against the tool with the flat end of the ball-peen hammer until you can no longer push the pin inside the link. Today Ill show you how to remove some links from a terrible terrible bracelet which is built using cotter pins.

Watch Band Screw Links. Lay the watchband upside down on a hard surface. At this stage you can determine if you need to remove more links from the watch band.

Stretch the band a few times and you will see a small connecting piece between the upper link and lower link. Find the pin holding the last link in place. Click here to learn How to Remove T-Bar Style Band Links.

Khaki Field Automatic Watch Green Dial H70595963 Hamilton Watch