How To Remove A Thetford Rv Toilet

If it sticks gently tilt it back and forth until it works free from the floor of the RV. In any case I could not reassemble it.

2manytoyz Repair Tips Toilet Replacement

Check bladeball seal compression with mechanism.

How to remove a thetford rv toilet. Step 1 Fully dump your black tank and make sure you are parked on a level surface. How do I remove my Aqua-Magic IV seat and cover. Lift the Thetford toilet straight up off the closet flange.

Loosen the two nuts at the base of the toilet. You will need to remove your toilet disconnect water lines and remove all water from your toilet. Turn off the water pump and the water in your toilet.

Just feel around and you will feel the stud. For Aqua-Magic IV disconnect the water supply line from the water valve located on the rear of the toilet. Other than that it is straight forward and shouldnt take along time.

It looked like it was forced on without the spring in the proper position or maybe through use the spring wore into the pedal. Remove the closet flange seal. Once the old toilet is out of the RV you can install the new one by reversing these steps.

Check for and remove any debris from bladeball seal track. Ill show you step-by-step how to do your own RV toilet seal replacement for under 15. I became really frustrated with the Thetford toilet.

THETFORD RV TOILET REBUILD RV LIVING About this Episode. Disconnect the water line from the water valveelbow. Remove the nuts from the closet flange bolts located on each side of the toilet.

Step 2 Unscrew and remove both the plastic toilet base cover and the toilet handle. If it doesnt just use a screwdriver to pry it off. Consult your Thetford Permanent Toilet Owners Manual for more detailed instructions and illustrations.

The old toilet we believe is as old as she is and was not holding water in the bowl anymore. The installation of our new Thetford brand toilet in Lady T. Lift up on the toilet to remove it.

Dont pay someone big bucks to fix the seal on your RV toilet. Harder than normal pedal or hand lever operation Apply light ﬁ lm of Thetford Toilet Seal Lubricant Conditioner or silicone spray to bladeball. If you havent checked it be sure to go through this process PRIOR to ordering your new RV toilet.

You can feel the box ratchet onto the nut and removal is easy. I use a box ratchet to remove both. Lift the toilet from the floor.

Flush the toilet to empty water from the bowl and remove remaining water pressure. It was very difficult to remove the foot pedal and when I got it off there was damage to it from the spring. Join us in this episode where we completely rebuild our Thetford Style II RV toilet in about 10.

With the front turn off the water supplypump. To gain access to the back bolt lift up the seat and cover and remove the access hole which should be located on top of the hopper. If you get on your knees and reach around behind the left side you will feel an opening.

To avoid damage do not use spray lubricants. Were replacing the flushing valve on our Thetford RV toilet. Then use a 12-inch extension with a universal and a 12-inch deep-well socket to remove the rear nut.

Check out how its donePlease give us a thumbs up if you liked the video and subscribe to see. Remove the water hose that connects the toilet to the RV water system. If bladeball seal is worn replace.

Carefully lift and remove the toilet from the closet flange. After you lift the toilet from its place the seal should come off nice and easy.

How To Repair A Thetford Aqua Magic Rv Toilet Youtube