How To Remove Petrol Lawn Mower Blade

Power tools can be dangerous if you do not hav. 142 Step One Seal The Gas Tank Prepare The Mower.

Pin On Mower Maintenance

143 Step Two Turn The Lawnmower For Access.

How to remove petrol lawn mower blade. To remove the blade you must turn the blades retaining bolt to the left or counterclockwise. Set the bolt and washer aside for now or thread it back into the shaft for safe keeping. Use a socket wrench turning left for a standard bolt and right for a reverse-threaded one.

14 Step By Step Guide To Sharpening Your Lawnmowers Blades Without Removing Them. Lever the blades out via the holes on the cutting disc taking care not to snap any area or cause any damage. When viewed from underneath the blade spins counter clockwise.

Squat down and place right boot to the right side of the blade with the blade in the 600 oclock position Place socket or spanner to blade bolt head and turn anti-clockwise. Obtain 14mm socket or spanner. Ill show you how to remove the lawnmower blade in this video.

Use a socket wrench of the appropriate size and unbolt the mounting while using your other hand to keep the blade from turning. Be careful not to lose any washers or mounting hardware that hold the blade into place which can be reused. In order to remove lawn mower blades its important to first pay attention to which types of lawn mowers can be tipped over without further precaution.

144 Step Three Stabilise Clean The Blade. Make sure the lawnmower is unplugged to prevent any accidents from occurring. Replace the lawn mower blade.

Before undoing the blade tip the mower on. Place the lawnmower onto its side giving you access to the cutting disc where the blades are housed. If you dont have a blade locking tool put on a hefty pair of boots.

Once the retaining bolt is off the old blade will also come right off. For all your Flymo Spare parts go to httpbitly1C4b0BGIn this video Helen shows us how to replace the lower fixed blade on a Qualcast 35s Classic Petro. Video on how I change the cutting blade on my Honda HRC215 lawnmower.

Turn the bolt that same direction to remove the blade. Pay attention to the position of the blade as youre removing it. 141 Tools Needed To Sharpen Your Mowers Blades.

Consider placing a wooden block under the blade to prevent it from moving around. A block of wood clamped to the housing holds the blade still while you loosen or tighten the mounting bolt. Remove the blade mounting bolt.

Our tools need to be repaired and maintained.

Which Side Of The Lawn Mower Blade Is Up Upgraded Home